36 June 22, 2006
Disassembly W220
PRELIMINARY
Disassembling and Assembling Case-A and Case-B
1. Remove battery door, battery, lower housing cover,and PCBA as described in the proce-
dures.
2. Release the hook between Case-A and Case-B by fingernail or tweezer as shown in Figure
30.
3. Push the Case-A forward to release Case-A and Case-B as shown in Figure 31.
Figure 30. Disassembling Case-A and Case-B
Figure 31. Disassembling Case-A and Case-B
To Next Page
Loading...
