June 22, 2006 37
Level 1-2 Service Manual Disassembly
PRELIMINARY
4. To replace, press Case-A down on the top side of Case-B to hook into Case-B as shown in
Figure 31.
5. Replace the speaker box, antenna carrier, PCBA, lower housing cover, battery, and battery
door as described in the procedures
Removing Contact Spring, BTB-FPC Connector, and FPC
1. Remove battery door, battery, lower housing cover,and PCBA as described in the proce-
dures.
2. Remove the contact spring from Case-B with tweezer..
Figure 32. Assembling Case-A and Case-B
Figure 33. Removing Contact Spring
To Next Page
Loading...
