EasyManuals Logo

Motorola XT420 Non-Display User Manual

Motorola XT420 Non-Display
898 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
English
6
BATTERIES AND CHARGERS
SAFETY INFORMATION
OPERATIONAL SAFETY
GUIDELINES
Turn the radio OFF when charging battery.
The charger is not suitable for outdoor use. Use
only in dry locations/conditions.
Connect charger only to an appropriately fused
and wired supply of the correct voltage (as
specified on the product).
Disconnect charger from line voltage by removing
main plug.
The outlet to which this equipment is connected
should be nearby and easily accessible.
In equipment using fuses, replacements must
comply with the type and rating specified in the
equipment instructions.
Maximum ambient temperature around the power
supply equipment must not exceed 40°C (104°F).
Power output from the power supply unit must not
exceed the ratings stated on the product label
located at the bottom of the charger.
Make sure that the cord is located where it will
not be stepped on, tripped over, or subjected to
water, damage, or stress.
63M03_A_BRCAN_en.book Page 6 Monday, November 19, 2018 11:30 AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola XT420 Non-Display and is the answer not in the manual?

Motorola XT420 Non-Display Specifications

General IconGeneral
Frequency BandUHF
Battery LifeUp to 20 hours
IP RatingIP55
Operating Temperature-30°C to +60°C
Weight244 g

Related product manuals