40
Common Radio Features
Answering a Page Using Enhanced Private Call
1 Press the programmed quick-response or call button.
OR
Press the m button below CALL.
The display shows the ID number of the
paging radio.
2 Press the PTT button.
The ID number is transmitted.
3 Pause for one second to allow the alert tone to sound on the
receiving radio.
Release the PTT button to listen to the transmission.
Notes: The display shows NO ANSR if the
party does not answer within 20
seconds. An alert tone sounds and
the telephone-like ringing will stop.
The display shows NO ACK if the
called radio is not in service. No
ringing will sound.
4 Press the PTT button to continue with your Private
Conversation after you hear the other party’s voice.
5 Press EXIT to hang up. The radio returns to the home display.
LIST
To Next Page
Loading...
