76
Secure Features
Selecting a Key (Conventional Only)
This feature allows you to manually select one of the 18 encryption
keys.
Follow these steps to select a key:
1 Press and hold down SEC softkey until a tone sounds, which
indicates entry into the Secure Menu.
2 Press the m button below KEY.
The display shows the following options
SEL (select), ABRT (abort) and PSET
(pset). Rotate the Mode Knob to find
the desired key.
3 Choose one of the following:
a. To save a key, press SEL (select).
b. To select the default encryption keys on a radio-wide basis,
press PSET. Selecting preset will cause the radio to return
to its preprogrammed keys on a per-zone/-mode basis.
4 To abort this menu, press ABRT or the PTT button. The ABRT
option exits the key-select menu without saving the selected
key choice. Pressing the PTT button exits the menu without
saving the selected key choice and allows the radio to transmit.
Notes: When you abort the key-select menu, the radio uses the
key that was selected prior to entry into the menu.
ERAS KEY EXIT
SEL PSET ABRT
To Next Page
Loading...
