50
NOTE: If the 5-second LED display is activated five
times a day, battery life expectancy is 24 months.
More frequent operation will decrease battery life.
SETTING THE TIME/DATE:
You may enter the Setting Mode from any of the 3
Display Modes – TIME1, TIME2 or DATE:
1. To enter Setting Mode, touch region B, maintaining
contact for about 2 seconds until the first 2 digits in
the active LED Display Mode start to blink.
NOTE: While the display is blinking, if the screen
idles (is not touched) for 10 seconds, the watch will
exit Setting Mode and return to normal Display Mode:
Repeat step one to re-enter Setting Mode.
2. Swipe your finger across the screen from region C
to D to increase the blinking number, or from region
D to C to decrease it.
3. To confirm the new blinking setting for Hour or
Month, touch region B for about 1.5 seconds until
the first 2 digits stop blinking, and the second 2
digits start blinking.
4. Swipe your finger across the screen from region C
to D to increase the blinking number, or swipe from
region D to C to decrease it.
5. To confirm the new blinking setting for Minutes or
Date, touch region B for about 1.5 seconds until
the second 2 digits stop blinking, and watch exits
Setting Mode.
NOTE: “P” indicating PM time and “Year” will only be
displayed while the watch is in Setting Mode (for Time
or Date, respectively); they will not appear in TIME1,
TIME2 or DATE Display Mode.
23
DIGITAL L.E.D. TOUCH-SCREEN MODELS
WITH DUAL-TIME ZONE AND MONTH/DATE DISPLAY
Includes Movado BOLD Touch models
To Next Page
Loading...
