Movado Datron - Mechatronic Chronograph Time Setting; Entering Time Setting Mode; Setting the Year

62
NOTES: The hands will index in the following
sequence: HOUR
MINUTE SECONDS
MODE
DATE.
Press and release button A quickly to advance the
active hand by one increment (this corresponds to
a 3
o
adjustment for Hour hand H and a 2
o
degree
adjustment for each of the other hands), or press and
hold button A to rapidly advance the active hand
clockwise.
2. After all hands have moved to their nominal
positions, press button A to index the first hand.
3. When the active hand points to the desired setting,
press and release button B to advance to the next
hand.
4. Use button A to index/align the active hand.
5. Repeat steps 3 and 4 for the remaining hands.
NOTE: You may exit Indexing mode at any time by
pushing crown C into position 0.
To enter Time Setting mode:
NOTE: The hands/functions are set in the following
sequence: HOUR
MINUTE YEAR
MONTH
DATE.
1. Pull crown C out from position 1 to position 2.
2. Press and release button A to advance the active
hand step by step, or press and hold button A to
advance the hand rapidly.
3. When active hand points to the desired setting,
press and release button B to advance to the
next hand.
4. Repeat steps 2 and 3 for the remaining settings.
NOTE: You may exit Time Setting mode at any time by
pressing crown C back into position 1.
Time Setting Display:
Hand S
•
Hand S indicates the type of setting by its position:
HOUR setting: 45’ = AM, 15’ = PM
MINUTE setting: 30’
YEAR setting: 55’
MONTH setting: 00’
DATE setting: 05’
Hand H
•
When setting the YEAR, hand H indicates the first digit
of the year.
•
In other settings, hand H indicates the hour.
Hand M
•
When setting the YEAR, hand M indicates the second
digit of the year.
•
In other settings, hand M indicates the minutes.
Subdial Hand F
•
Indicates “SET”
Subdial Hand D
•
When setting the MONTH, hand D indicates the
month.
•
In other settings, hand D indicates the date.
To set the YEAR:
•
The first two digits of the year (“20”) do not need to
be set.
•
Use button A to set the last two digits of the year;
beginning with the fourth digit.
•
Hands M (indicating the fourth digit) and H (indicating
the third digit) both start out at the 12:00 position.
TIP: Press and release button A the total number of
times you wish to set as the last two digits: Once to set
“2001”, ten times to set “2010” or sixteen times to set
“2016”, etc.
For example: Pressing button A once would move hand
M to 1:00, indicating the year “2001”.
28
MECHATRONIC MULTI-FUNCTION CHRONOGRAPH
with local time/perpetual calendar, flyback chronograph and countdown timer functions
Includes Vizio multi-function chronograph models