PCI Express Boards Software Installation
Windows Drivers
Moxa provides drivers that allow you to use the PCI Express Series serial boards for various Windows
platforms.
The overall procedure for installing the
Windows drivers for the PCI Express boards is
summarized in the flowchart on the right.
Plug the PCI Express board into an empty
PCI Express slot. See the Hardware
Installation chapter for details.
Turn on your PC. Windows will
automatically detect the board.
Install the driver that you can download
from the M oxa website. See the
Installing the Driver subsection in this
chapter for detailed instructions.
Configure the board’s ports. See the
Configuring the Ports subsection in this
chapter for detailed instructions.
The PCI Express board and ports are
ready to use.
No
Check the status of Moxa's multiport
serial boards. See the Checking the
Status subsection in this chapter for
To Next Page
Loading...