Moxa Technologies CP-116E-A User Manual

2
2. Hardware Installation
In this chapter, we show the dimensions diagrams of all of the boards in the PCI Express Series and
describe the hardware installation procedure. Since the BIOS automatically assigns the PCI Express board’s
IRQ number and I/O addresses, you must plug in the board before installing the driver (driver installation is
discussed in Chapter 3).
The following topics are covered in this chapter:

CP-118EL-A Dimensions

CP-168EL-A Dimensions

CP-104EL-A Dimensions

CP-102E Dimensions

CP-102EL Dimensions

CP-132EL Dimensions

CP-132EL-I Dimensions

CP-114EL Dimensions

CP-114EL-I Dimensions

CP-116E-A Dimensions

CP-134EL-A-I Dimensions

CP-118E-A-I/138E-A-I Dimensions

Plugging the Board into an Expansion Slot

Moxa Technologies CP-116E-A Specifications

General

Brand	Moxa Technologies
Model	CP-116E-A
Category	PCI Card
Language	English