Moxa Technologies CP-116E-A User Manual

PCI Express Boards Software Installation
3-17
Wait until the uninstall process is done.
Non-Windows Drivers
Drivers are provided for DOS, Linux, and SCO.
DOS
Moxa DOS API-232 is a software package that assists users in developing new programs, or debugging
existing programs for serial communications. This section explains how to install the package, how to set up
the driver, and how to load or unload the driver.
Moxa provides drivers that allow you to use the following serial board products for DOS:
• PCI Express Boards: CP-102E, CP-102EL, CP-132EL, CP-132EL-I CP-104EL-A, CP-114EL, CP-114EL-
I, CP-118EL-A, CP-168EL-A, CP-118E-A-I, CP-138E-A-I, CP-134EL-A-I, CP-116E-A
WARNING
If you are using a Serial ATA HDD for DOS, the installation process
will hang. To prevent the installation
process from hanging, change your HDD to an IDE drive.
NOTE
The following procedure shows how to install the CP
-168EL driver for DOS.

Moxa Technologies CP-116E-A Specifications

General

Brand	Moxa Technologies
Model	CP-116E-A
Category	PCI Card
Language	English