PCI Express Boards Software Installation
Installing the Driver
1. Run the installation program, DOSINST.EXE from the \Software\DOS folder on the Documentation
and Software CD. Specify the target API-232 directory (e.g., C:\Moxa
) to which the driver will be copied.
Press F2 to start the installation.
2. After the installation is complete, a window will open to ask if you want to run SETUP.EXE. Press Y to
run the program.
Setting up the Driver
This section covers some of the setup program’s most frequently used functions. For complete details, press
F1 to open the online help file.
1. Run BIN\SETUP.EXE.
2. Press Enter to select the model name of the Moxa board you are installing.
To Next Page
Loading...
Need help?
General
