MGate MB3000 Modbus Gateway User Manual
Enable Log Capacity
Warning (%)
The maximum number of log capacity is 1,000. When the log amount exceeds the
warning percentage, it will trigger an event to SNMP Trap or Email
Warning by
action
Overwrites the oldest event log
Stops recording event log
IP address of the server that will record the log data
Users can view the recorded information from the web console or text mode console.
Auto Warning Settings
Auto Warning is triggered by different events. When a checked trigger condition occurs, the MGate can send
e-mail alters, SNMP Trap messages, or open/close the circuit of the relay output and trigger the Fault LED to
start blinking. To enable an e-mail alert, configure the e-mail address on the E-mail Alert page. Likewise,
to enable SNMP Trap alerts, configure SNMP trap server on the SNMP Trap page. Please note that this
feature is not supported on MB3180 gateway.
To Next Page
Loading...
Need help?
General
