Moxa Technologies NPort 5150 User Manual

NPort 5000 Series User Manual
96
S Registers
No.
S Register
Description & default value
Remarks
1
S0
Ring to auto-answer (default=0)
2
S1
Ring counter (always=0)
no action applied
3
S2
Escape code character (default=43 ASCII “+”)
4
S3
Return character (default=13 ASCII)
5
S4
Line feed character (default=10 ASCII)
6
S5
Backspace character (default= 8 ASCII)
7
S6
Wait time for dial tone (always=2, unit=sec)
no action applied
8
S7
Wait time for carrier (default=3, unit=sec)
9
S8
Pause time for dial delay (always=2, unit=sec)
no action applied
10
S9
Carrier detect response time (always=6, unit 1/10 sec)
no action applied
11 S10
Delay for hang up after carrier
(always=14, unit 1/10 sec)
no action applied
12
S11
DTMF duration and spacing (always=100 ms)
no action applied
13 S12
Escape code guard time
(default=50, unit 1/50 sec)
to control the idle time for “+++”
Parameter Setting
Factory
Default
Description Necessity
TCP Alive
Check Time
0 to 99 min 7 min
0 min: TCP connection is not closed due to an
idle TCP connection.
1 to 99 min: The NPort closes the TCP
connection automatically if there is no TCP
activity for the given time.
Required
Local TCP port 1 to 65535 4001
The TCP port that other devices must use to
contact this device. To avoid conflicts with
standard TCP ports, the default is set to 4001.
Required

Moxa Technologies NPort 5150 Specifications

General

Brand	Moxa Technologies
Model	NPort 5150
Category	Server
Language	English