Moxa Technologies NPort 5230 User Manual

NPort 5000 Series User Manual
108
2. Unlock the NPort you wish to configure. Right click a specific NPort and select the Upgrade Firmware
function to start upgrading the firmware.
3. Select the correct ROM file to download.
4. Wait while the Upgrade Firmware action is processed.
ATTENTION
You can simultaneously upgrade the firmware of multiple NPort units that are of the same model. To select
multiple NPort units, hold down the Ctrl key when selecting an additional NPort, or hold down the Shift key
to select a block of NPort units.

Moxa Technologies NPort 5230 Specifications

General

Isolation	1.5 kV
Certification	CE, FCC, EN
Serial interface type	RS-232, RS-422, RS-485
Serial ports quantity	2
Ethernet LAN data rates	10, 100 Mbit/s
Surge protection voltage	0.5 kV
Ethernet LAN (RJ-45) ports	1
Supported network protocols	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, HTTP, SMTP, IGMP v1/2
Compatible operating systems	Windows 95/98/ME/NT/2000/XP/2003/Vista Windows XP/2003/Vista (32/64-bit) SCO Unix SCO OpenServer UnixWare 7 UnixWare 2.1, Unix SVR 4.2 Unix QNX 4.25, QNX 6 Solaris 10 FreeBSD AIX 5.x HP-UX 11i
Storage temperature (T-T)	-20 - 85 °C
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	5 - 95 %
Input voltage	12 - 48 V
Safety	UL, TÜV, DNV

Weight and Dimensions

Weight	340 g
Dimensions (WxDxH)	67 x 100.4 x 22 mm