Moxa Technologies UPORT 1130 User Manual

UPort 1100 Series Installation and Configuration
2-25
5. Open the project you created. Click Project on top of the screen, and then select Add Existing
Subproject. Switch the folder to “C:\ MOXAUP1100\wince600\U1100” and add subprojects into your OS
Design. Assign the pbpxml file to a different folder (i.e. mxu11x0.pbpxml).
6. After the subproject is added, you may configure the “mxupce6.reg” registry file with the location
[HKEY_LOCAL_MACHINE\Drivers\USB\ClientDrivers\MXU_11x0].

Moxa Technologies UPORT 1130 Specifications

General

Connector 1	USB
Connector 2	DB-9M
Connector 1 gender	Male
Depth (imperial)	2.36 \
Width (imperial)	1.51 \
Height (imperial)	0.79 \
Weight (imperial)	0.14 lbs
Dimensions (WxDxH)	38.4 x 60 x 20 mm
Product color	Silver
Data transfer rate	0.012 Gbit/s
Compatible operating systems	Windows 98, ME, 2000, XP (x86/x64), 2003 (x86/x64), Vista (x86/x64) WinCE 5.0 Linux 2.6 (x86/x64), Linux 2.4 (x86/x64)
Input voltage	5 V

Weight and Dimensions

Weight	65 g