Moxa Technologies UPORT 1130 User Manual

UPort 1100 Series Installation and Configuration
2-31
3. Click on the “Explore” button in the ActiveSync window, and then copy the UP1100_COM_v1.0_Setup.CAB
(For WinCE 6.0) or UP1100_COM_v1.1_Setup.CAB (For WinCE 5.0) file to the Mobile/Target Device.
4. Double click on the CAB file to start installing the UPort 1100 series WinCE driver. After installing the driver,
plug the UPort 1100 series device into the USB port of the WinCE Device. The driver will be loaded
automatically. At this point, the UPort 1100 series is ready to use.

Moxa Technologies UPORT 1130 Specifications

General

Connector 1	USB
Connector 2	DB-9M
Connector 1 gender	Male
Depth (imperial)	2.36 \
Width (imperial)	1.51 \
Height (imperial)	0.79 \
Weight (imperial)	0.14 lbs
Dimensions (WxDxH)	38.4 x 60 x 20 mm
Product color	Silver
Data transfer rate	0.012 Gbit/s
Compatible operating systems	Windows 98, ME, 2000, XP (x86/x64), 2003 (x86/x64), Vista (x86/x64) WinCE 5.0 Linux 2.6 (x86/x64), Linux 2.4 (x86/x64)
Input voltage	5 V

Weight and Dimensions

Weight	65 g