69Moxee m2160 User Manual
Wi-Fi
Turning Wi-Fi on and connecting to a wireless network
1. From the Home screen, swipe screen Apps >
Settings.
2. Tap
Wireless & Internet > Wi-Fi.
3. Select the Wi-Fi check box to turn Wi-Fi on.
4. The network names and security settings of
detected Wi-Fi networks are displayed.
5. Tap a Wi-Fi network to connect.
• If you selected a network that is secured, enter the security
key and then tap Connect. Depending on the network type
and security settings, you may also need to enter more
information or choose a security certificate.
Connecting to a Wi-Fi network with EAP-TLS security
You may need to install a network certificate to your phone
before you can connect to a Wi-Fi network with EAP-TLS
authentication protocol.
1. Save the certificate file to the root
folder of the microSD card.
2. From the Home screen, swipe screen Apps >
Settings.
3. Tap
Security > Encryption & credentials
> Install from SD card.
4. Select the network certificate needed to
connect to the EAP-TLS network.
5. After the certificate is installed, follow the steps in the
previous section to connect to the Wi-Fi network.
Checking wireless network status
1. From the Home screen, swipe screen Apps >
Settings.
2. Tap Wi-Fi.
3. Tap the wireless network that the phone
is currently connected to.
A message box is then displayed showing the Wi-Fi network
name, status, speed, signal strength, and more.
To Next Page
Loading...