21
Operation Steps:
• Long press the center button to enter the menu, refer to the compatibility list to
select the correct camera type.
• Refer to the list to choose and connect the camera control cable. Connect the Mini-
USB end of the control cable to the control port of Air 2S. Connect the other end to
the corresponding control port of the camera.
• You can achieve recording by clicking the menu button one time and taking photos
by clicking menu button twice after selecting the camera type and connecting the
camera control cable.
Note:
1. Cameras equipped with Micro USB 3.0 interface, such as the Nikon D850, can
be normally controlled by half plugging the M3C-Micro cable.
2. After plugging the camera control cable, please operate the camera according
to the prompts on the camera screen, otherwise the camera control function
may not work properly.
• Start/Stop: Press power button once
• Shoot photos: Press power button twice
• Adjust shutter: Press the up button of the dial (TV)
• Adjust aperture: Press the down button of the dial (AV)
• Adjust ISO: Press the left button of the dial (ISO)
When adjusting camera parameters, press the
corresponding button and the screen will display the value,
then turn the dial to adjust the value. After the adjustment
is completed, press the corresponding button again to turn
off the adjustment of camera parameters.
• Turn on/ off preview: press the right button of the dial to turn on or off live preview.
Note:
1. Only when start camera settings can turn the dial adjust parameters. Under
the default state, turn the dial would adjust the follow speed.
2. Some cameras with sensor, like Sony A7S2 will shut down the screen and
switch to viewfinder for preview, if there is obstruction before the viewfinder.
Set preview setting to screen
To Next Page
Loading...
