Moza Air 2S - Specifications

29
Upgrade via App:
• Turn off the gimbal.
• Hold the Menu button and do not release, then press the power button with your
another hand until the prompt “Boot Mode” appears on the screen.
• Start App, press Bluetooth to search for Air 2S device and connect.
• The App will automatically enter the firmware upgrade interface, please wait for the
firmware download to complete, press the ‘upgrade’ button and wait for about 5
minutes.
• During the upgrade process, ‘upgrading' will be displayed on the gimbal screen, and'
upgrade success' will be displayed on the screen after the upgrade is completed, and
then Air 2S can be restarted.
Note: Your gimbal will automatically update to the latest firmware after
firmware update process.
Specifications
Air 2S
Payload Range
0.5kg~4.2kg
Dimension
478*206*184mm(W*D*H)
Tilt Camera Tray Dimension
110 mm
Roll Camera Tray Dimension
100 mm
Pan Mechanical Endpoint Range
360°
Roll Mechanical Endpoint Range
-100°~+200°
Tilt Mechanical Endpoint Range
-190°~+110°
Battery Type
Li-ion 18650MH1-4S1P 4INR19/66
Battery Capacity
3200 mAh
Working Votage
14.8V
Static Current
150mA
Communication
BT5.0 BLE
USB
Camera Control Port
Mini USB 5V 1A
Dummy Battery Port
DC2.0mm 7.8V 1A
Accessory Power Supply Port
DC5.5mm 16.8V
TYPE-C Port
Quick-acting charging is available
Temperature
0—50°C