MPP Solar 2424LVMSD User Manual

14
02
Maximum charging current:
To configure the total
charging current for solar
and utility chargers.
(Max. charging current =
utility charging current +
solar charging current)
30A
40A
50A
60A (default)
70A
80A
90A
100A
110A
120A (only for 3KVA with MPPT
models)
130A (only for 3KVA
with MPPT models)
140A (only for 3KVA with MPPT
models)
03
AC input voltage range
Appliances (default)
If selected, acceptable AC input
voltage range will be within
90-280VAC.
UPS
If selected, acceptable AC input
voltage range will be within
170-280VAC.
04
Power saving mode
enable/disable
Saving mode disable
(default)
If disabled, no matter connected load
is low or high, the on/off status of
inverter output will not be effected.
Saving mode enable
If enabled, the output of inverter will
be off when connected load is pretty
low or not detected.
05
Battery type
AGM (default)
Flooded
User-Defined
If “User-Defined” is selected, battery
charge voltage and low DC cut-off
voltage can be set up in program 26,
27 and 29.
06
Automatically restart when
overload occurs
Restart disable
(default)
Restart enable

MPP Solar 2424LVMSD Specifications

General

Brand	MPP Solar
Model	2424LVMSD
Category	Inverter
Language	English