MPPT SMPPT20D User Manual

SMPPT Installation & Operation Manual Version 1.0
19
1> Load mode(see below table)
15h
Regular control mode
14h
Light control mode
0~13h
Light control with switch-off point at night (0 ~ 13 hrs)
Table 5.2-1
Photo 5.2-11
5.2.9 Restore factory defaults
Photo 5.2-12
1> In “Temperature” interface, by long pressing – (>3S)controller is restored to factory
defaults.
6. Faults and Remedies
6.1 Error Code and Correction
Error
code
Cause Correction
Ex1*
LVD protection of battery
and load switched off
Manually recharge the battery
Ex2 HVD protection of battery Make sure connection between battery and controller is

MPPT SMPPT20D Specifications

General

Brand	MPPT
Model	SMPPT20D
Category	Controller
Language	English