MR TAPCON 230 - Setting Delay Time T2

4 Functions and settings
21
Setting delay time T2
With this parameter, you can set delay time T2. Delay
time T2 is used to compensate for large control devia-
tions faster.
Proceed as follows to set the delay time T2:
1. > Parameter > Control parameter >
Press until the desired parameter is displayed.
ð Delay time T2.
2. Press to increase the time or to reduce it.
3. Press .
ð The delay time T2 is set.
Activating/deactivating delay time T2
To activate/deactivate the delay time T2, proceed as fol-
lows:
1. > Parameter > Control parameter >
Press until the desired parameter is displayed.
ð T2 activation.
2. Press or to activate/deactivate T2.
3. Press .
ð The delay time T2 is activated/deactivated.
4.3.5