Need help?Do you have a question about the MR TAPCON 230 basic and is the answer not in the manual?
General| Type | Voltage Regulator Controller |
|---|---|
| Input voltage | 24 V DC |
| Output voltage | 24 V DC |
| Protection class | IP 20 |
| Output current | Max 1 A |
Lists documents relevant to the TAPCON® 230 product.
Explains abbreviations, symbols, and typographic conventions used in the manual.
Details the structure and meaning of warning notices.
Provides essential safety guidelines for product handling and operation.
Defines the intended and correct usage of the product.
Specifies the required training and expertise for personnel.
Outlines the key functionalities and capabilities of the voltage regulator.
Describes the different operational modes like AUTO, MANUAL, LOCAL, and REMOTE.
Details the physical components and layout of the device.
Explains how the device connects and communicates with other systems.
Covers the front panel controls, display, and LEDs for operation.
Explains the purpose and function of each button on the operating panel.
Provides instructions for safe handling and checking of delivered goods.
Step-by-step guide for safely removing the device from its packaging.
Details the procedures for installing the device in various configurations.
Steps required before physically mounting the device.
Instructions for installing the device into a control panel cutout.
Procedures for directly fixing the device to a wall.
Instructions and recommendations for wiring the device.
Specifies suitable cable types and their properties for connection.
Guidelines for ensuring the device operates without EMC interference.
Procedure to verify correct wiring and initial operation after mounting.
Overview of tasks needed before the device is fully operational.
Settings required for initial setup and operation.
How to choose between NORMset and full parameterization.
Procedures to verify the correct operation of voltage regulation functions.
Detailed steps for testing core voltage control mechanisms.
Detailed descriptions of parameters for voltage regulation.
How to set and manage target voltage levels.
Step-by-step guide to inputting desired voltage values.
Defines the acceptable voltage deviation range for control.
Explains how to calculate the appropriate bandwidth.
Configuration of operational limits for voltage and current.
How to configure the threshold for undervoltage blocking.
How to configure the threshold for overvoltage blocking.
How to configure the threshold for overcurrent blocking.
Settings for system-specific data and device parameters.
Inputting transformer ratios and measurement setup.
Configuring the primary voltage for display and calculation.
Specifying the current transformer ratio for accurate readings.
General device settings like language, ID, and communication.
Controls automatic locking of device keys after inactivity.
How to assign functions to digital inputs and outputs.
Mapping functions to the device's digital inputs.
Accessing device status, measurement, and diagnostic information.
Shows real-time voltage, current, and phase angle data.
Procedure to restore device settings to factory defaults.
Troubleshooting common operational issues and their remedies.
Diagnosing why the regulator is unresponsive in automatic mode.
Troubleshooting issues related to the device's display and buttons.
Identifying causes for inaccurate voltage or current readings.
Explains the meaning and handling of various event messages.
Specifications for power supply and consumption.
Operating and storage temperature ranges for the device.
Compliance and performance test standards applied to the product.
Standards related to the device's resistance to and emission of electromagnetic interference.
To Next Page
