7 Functions and settings
144 TAPCON® 230 basic 2117246/02 EN © Maschinenfabrik Reinhausen 2012
To display the measured values, proceed as follows:
► > Info > 1x
<01> Measured values.
7.5.3 Display calculated values
Calculated values are shown in this screen. The following values can be dis-
played:
Figure 43 Calculated values
1 I active (active share) in %
2 I blind (blind share) in %
3 Apparent power S in MVA
4 Reactive power Q in Mvar
5 Operation counter
6 Power factor cos φ
The values on the right in the rows are only displayed if the transformer data
has been entered previously.
To Next Page
Loading...
