MR TAPCON 230 basic - Menu Overview

10 Menu overview
© Maschinenfabrik Reinhausen 2012 2117246/02 EN TAPCON® 230 basic 167
10 Menu overview
The following sections give an overview of the relevant menus and submenus.
Level 1 Level 2 Parameters
 Normset activation
 Desired value 1
 Primary voltage
 Secondary voltage
 Desired value 1
 Desired value 2
 Desired value 3
 Desired value selection
 Bandwidth
 Delay time T1
 Characteristics T1
 Activation T2
 Delay time T2
 V< Undervoltage (%)
 V< Delay time
 V< Undervoltage blocking
 V< below 30 V
 V> Overvoltage (%)
 V> Overvoltage blocking
 I> Overcurrent (%)
 I> Overcurrent blocking
 I< Undercurrent
 I< Undercurrent blocking
 Negative active power blocking