MR TAPCON 230 basic User Manual

4 Packaging, transport and storage
32 TAPCON® 230 basic 2117246/02 EN © Maschinenfabrik Reinhausen 2012
4.1.3 Markings
The packaging bears a signature with symbols with instructions for safe
transport and correct storage. The following symbols apply to the dispatch (of
non-hazardous goods). Adherence to these symbols is mandatory.
Protect against moisture Top Fragile
Figure 8 Shipping pictograms
4.2 Transportation, receipt and handling of shipments
In addition to oscillation and shock stress, jolts must also be expected during
transportation. In order to prevent possible damage, avoid dropping, tipping,
knocking over and colliding with the product.
If a crate falls from a particular height (e.g. when slings tear) or experiences
an unbroken fall, damage must be expected regardless of the weight.
Before acceptance, all deliveries must be checked by the recipient (acknowl-
edgement of receipt) for the following:
 Completeness based on the delivery slip
 External damage of any type.
The checks must take place after unloading when the crate can be accessed
from all sides.
If external transport damage is detected on receipt of the shipment, proceed
as follows:
 Immediately record the transport damage found in the shipping documents
and have this countersigned by the carrier.
 In the event of severe damage, total loss or high damage costs, imme-
diately notify the sales department at Maschinenfabrik Reinhausen and the
relevant insurance company.

MR TAPCON 230 basic Specifications

General

Brand	MR
Model	TAPCON 230 basic
Category	Controller
Language	English