MR TAPCON 230 basic User Manual

3 Product description
24 TAPCON® 230 basic 2117246/02 EN © Maschinenfabrik Reinhausen 2012
3.3.2 Communication Interfaces
The parameters for the product can be set using a PC. The COM 1 (RS232)
serial interface on the front panel is provided for this purpose.
TAPCON®trol software is needed for parameterization. It can be obtained
from the Download Center on the Maschinenfabrik Reinhausen website
(www.reinhausen.com).
Figure 4 Device connection to a PC
1 PC with TAPCON®-trol software
2 Connection cable with RS232 connection
3 TAPCON® 230 device

MR TAPCON 230 basic Specifications

General

Brand	MR
Model	TAPCON 230 basic
Category	Controller
Language	English