MR TAPCON 230 basic - General

7 Functions and settings
122 TAPCON® 230 basic 2117246/02 EN © Maschinenfabrik Reinhausen 2012
7.4.2 General
This submenu enables general settings, which are also required for commis-
sioning, to be made on the device. You can change the following general set-
tings:
 Language
 Regulator ID
 Baud rate (COM1 setting)
 Raise/lower switching pulse time
 Operation counter
 Display dimming
 Key lock
 Function monitoring
 Motor runtime
 Manual and auto mode
 Local and remote