To Next Page

To Previous Page

7. RS232 PC SERIAL INTERFACE

The instrument features an RS232 output via 3.5 mm

Terminal ( 4-16, Fig. 1). The connector output is a 16

digit data stream which can be utilized to the user's

specific application.

An RS232 lead with the following connection will

be required to link the instrument with the PC

serial input.

Meter PC

(3.5 mm jack plug) (9W 'D" Connector)

Center Pin..........................................Pin 2

Ground/shield........................................Pin 5

The 16 digit data stream will be displayed in the

following format :

D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0

Questions and Answers:

Need help?

Do you have a question about the MRC DO-5510 and is the answer not in the manual?

MRC DO-5510 Specifications

General