MRC PTX-PRO - Front Panel Vs. Configurator Settings

Routine Operation 3-14PTX-PRO User and Technical Manual
3.7 Front Panel vs. Configurator
Settings
The design of the PTX-PRO and the Configurator software
makes commonly available settings accessible from the PTX-
PRO front panel switches and alphanumeric display and more
advanced settings accessible through the Configurator software.
A summary of settings that can be controlled by each method is
shown in Table 3-1.
Table 3-1: Front Panel vs. Configuration Setting
Parameter
Available
Settings
Set
Using
Control
Switches
Set Using
Configurator
Presets
Preset in use 1, 2,... 9
✔ ✔
Preset text Any 12
alphanumeric
characters
✔
Operation
Mode
(Special
license
required for
LMS-T)
•COFDM
✔
• ASI In
✔
• Ext. IF In
✔
•LMS-T
✔
Color Bars • ON
✔ ✔
•OFF
✔ ✔
•Auto
✔ ✔
• Standby
✔ ✔
IF/CW Tone • ON ✔
•OFF
✔
Variable
Voltage
Attenuation
(TX VVA)
(Back Off)
• Variable (0 to
-19 dB in 1
dB steps)
✔ ✔
Channels
Channel &
Offset in use
• 1 thru 22
✔
•+, 0, -
✔
Channel &
Offset
Frequencies
13 GHz band
✔
MPEG
Service
Name
• Any eight
alphanumeric
characters
✔
Network
Name
• Any eight
alphanumeric
characters
✔
Video Input
Mode
•SD
✔ ✔
• HD (Special
license
required)
✔ ✔
Table 3-1: Front Panel vs. Configuration Setting (Continued)
Parameter
Available
Settings
Set
Using
Control
Switches
Set Using
Configurator