MRC PTX-PRO - Change Preset Names in On-Line Mode

Advanced Operation 5-16PTX-PRO User and Technical Manual
5.3.6 Change Preset Names in On-Line Mode
The flowchart required to change Preset names in the on-line
mode is contained in Figure 5-13.
Figure 5-13: Change Preset Names in On-Line Mode
MRC Configurator
Icon
Main Page
Radio Control
COM Port Menu
Select COM port
required
Connect
Radio Mode,
MPEG, COFDM,
LMS-T, Channel
Plan, and
Licensing tabs
are displayed
Load All Settings
from Radio
All Preset names
and configuration
settings are
loaded into the
Configurator from
the radio
Preset
Operations
Change Preset
Names
Change Preset
Names Menu
Enter Preset
Names (12
characters Max)
Program All
Settings to Radio
Preset Names
and all
configuration
settings are
loaded into the
radio
Save All Settings
to File
Save
Configuration
File window
Saves
configuration file
to a PC
Preset Names
and all
configuration
settings are
saved to a file on
a PC
And/Orr
Close
Configurator
window
Disconnect