MRC PTX-PRO - Powering up; Checks before Power-Up; Initial Power-Up

Installation 6-16PTX-PRO User and Technical Manual
Figure 6-17: Multipurpose Radio and Wayside Data Cable
9
9
5
5
1
1
6
6
1
1
6
6
9
9
5
5
5
5
1
1
6
6
9
9
RED
RED
WHT
WHT
5
5
7
7
6
6
4
4
3
3
2
2
1
1
8
8
9
9
9
9
8
8
1
1
2
2
3
3
4
4
6
6
7
7
5
5
9
9
8
8
1
1
2
2
3
3
4
4
6
6
7
7
5
5
WHT
WHT
RED
RED
BLK
BLK
RADIO (M)
RADIO (M)
WAYSIDE (F)
WAYSIDE (F)
RADIO (M)
RADIO (M)
WAYSIDE (F)
WAYSIDE (F)
RADIO/WAYSIDE
RADIO/WAYSIDE
(F)
(F)
RADIO/
RADIO/
WAYSIDE (F)
WAYSIDE (F)
6.11 Powering Up
When the wiring and mounting are completed, it is time to power
up the PTX-PRO. As good practice, you should make a final
check before power is applied.
6.11.1 Checks before power-up
Here are your final pre-power-up checks:
• Double check to be sure all the cables are connected to
the correct connectors.
• Make sure the connections are all fully mated and locked.
CAUTION
Be sure the power being supplied matches
the power required by the equipment.
6.11.2 Initial power-up
Now you are ready to apply power:
1. Verify the power cable is properly connected to the front
panel power connector.