MRC PTX-PRO - Page 48

Advanced Operation 5-8PTX-PRO User and Technical Manual
Figure 5-5: Create New Configuration On-Line - Sheet 4 of 5
COFDM Tab
Bandwidth
Select 6 MHz, 7
MHz, or 8 MHz,
as required
FEC
Select 1/2, 2/3,
3/4, 5/6, or 7/8,
as required
GuardModulation Type
Select 16 QAM,
64 QAM, or
QPSK, as
required
C
Note
Perform all operations on the COFDM page
for each active Preset, as required.
LMS-T Tab
Bandwidth
Select 10 MHz or
20 MHz, as
required
FEC
2/3 is the only
available option
Guard
Select 1/8 or
1/16, as required
Modulation Type
Select QPSK or
16 QAM, as
required
Note
Perform all operations on the LMS-T page for
each active Preset, as required.
D
Select 1/4, 1/8,
1/16, or 1/32, as
required
From
Figure 5-3
To
Figure
5-6