MRC PTX-PRO - Page 53

Advanced Operation 5-13PTX-PRO User and Technical Manual
Figure 5-10: Load and Modify Configuration Settings On-Line - Sheet 4 of 5
COFDM Tab
Bandwidth
Select new
Bandwidth
option, as
required
FEC
Select new
forward error
correction (FEC),
as required
GuardModulation Type
Select new
Modulation
Type option, as
required
C
Note
Perform all operations on the COFDM page
for each active Preset, as required.
LMS-T Tab
Bandwidth
Select new
Bandwidth
option, as
required
FEC
2/3 is the only
available option
GuardModulation Type
Select new
Modulation
Type option, as
required
Note
Perform all operations on the LMS-T page for
each active Preset, as required.
D
Select new
Guard interval
option, as
required
Select new
Guard interval
option, as
required
To
Figure
5-11
From
Figure
5-8