PrimaX
GB
3
Declaration of Conformity
The manufacturer or his in the community established authorized representative
MSA AUER GmbH
Thiemannstraße 1
D-12059 Berlin
declares that the product
PrimaX I, PrimaX P
based on the EC-Type Examination Certificate: BVS 10 ATEX E009 X
complies with the ATEX directive 94/9/EC, Annex III. Quality Assurance Notification
complying with Annex IV of the ATEX Directive 94/9/EC has been issued by DEKRA
EXAM in Bochum, Notified Body number: 0158.
Standards: EN 60079-0:2009, EN 60079-1:2007, EN 60079-11:2007,
EN 60079-26:2007, EC 60079-31:2009, EN 61241-11:2006
EN 60079-29-1:2007, EN 50104:2010, EN 50271:2010
The product is in conformance with the directive 2004/108/EC, (EMC):
EN 50270:2006 Type 2, EN 61000 - 6 - 3:2007
MSA AUER GmbH
Dr. Axel Schubert
Manager R&D Instruments
& Approvals INT-T
Berlin, January 2014
To Next Page
Loading...
