3-10
MS-9638 Server Board
[Enhanced] SATA and PATA drives are auto-detected and placed
(non-AHCI) in Native IDE mode.
SATA RAID & AHCI Enable (for Adaptec SATA RAID Option ROM)
If this setting is set to [Enabled] and the SATA RAID function is not configured,
only AHCI mode will be supported. Once AHCI mode is enabled, 6 SATA
HDDs will be supported under this mode.
9638v3.0-3.P65 2007/5/8, 下午 01:5410
To Next Page
Loading...
