3-18
MS-9638 Server Board
System Event Log (list mode)
This setting shows the system event logs in list mode.
Realtime Sensor Data
This setting shows the real-time CPU/system temperature & voltage data on the
system monitor sensor.
BMC Password
This field allows you to enter the password for BMC.
Legacy USB Support
Set to [Enabled] if you need to use any USB 1.1/2.0 device in the operating system
that does not support or have any USB 1.1/2.0 driver installed, such as DOS and SCO
Unix. Set to [Disabled] only if you want to use any USB device other than the USB
mouse.
To Next Page
Loading...
