+D=FJAH
2-16
3-pin dual color power LED (ACPI request): Connected to pin 4, 5 &
6. The 3-pin power LED changes its color to indicate different system
states:
GREEN color indicates Full-On mode.
ORANGE color indicates suspend/sleep mode.
Speaker
Speaker from the system case is connected to this pin.
If on-board Buzzer is available, then:
Short pin 14-15: On-board Buzzer Enabled.
Open pin 14-15: On-board Buzzer Disabled.
HDD LED
HDD LED shows the activity of a hard disk drive connected to the IDE1 or
IDE2 connector. Avoid turning the power off while the HDD is working.
You can connect the HDD LED from the system case to this pin.
To Next Page
Loading...
