0=H@M=HA5AJKF
2-17
Power Saving LED Connector: JGL1
JGL1 is connected to a power saving LED. There are two types of LED
that you can use: 3-pin or 2-pin (ACPI request) LED. If connected to a dual
color LED, the LED light is green when system in turned on, and turns to
orange color while entering the sleep state. For single color LED, the LED is lit
when system is on, and blinks during the sleep state.
JGL1
1
1-2 Single Color 1-2 Dual Color
1-3 Blink
3-Pin LED 2-Pin LED
1
3
Green Color
Orange Color
1
3
Green Color
Orange Color
PLED1
Suspend LED
GND
To Next Page
Loading...
