AWARD
®
BIOS Setup
3-23
speed. Settings are Disable, 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min, 20
Min, 30 Min, 40 Min and 1 Hour.
Suspend Mode
If system activity is not detected for the length of time specified in this field,
all devices except CPU will be shut off. Settings are Disable, 1 Min, 2 Min, 4
Min, 6 Min, 8 Min, 10 Min, 20 Min, 30 Min, 40 Min and 1 Hour.
PM Control by APM
Setting to Yes will activate an Advanced Power Management (APM) device
to enhance Max Saving mode and stop CPU internal clock. Settings are Yes
and No. Default is Yes.
Video Off Option
This option is for choosing the setting in which the monitor will turn off.
Always On Always turn on.
Suspend --> Off During Suspend mode, the monitor will be
turned off.
All Modes --> Off The monitor is turned off during Doze, Standby
or Suspend mode.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to turn
off the vertical and horizontal synchroniza-
tion ports and write blanks to the video
buffer.
Blank Screen This option only writes blanks to the video
buffer.
DPMS Support Initial display power management signaling.
MODEM Use IRQ
Name the interrupt request (IRQ) line assigned to the modem (if any) on your
system. Activity of the selected IRQ always awakens the system. Settings
are 3, 4, 5, 7, 9, 10, 11 and NA.
To Next Page
Loading...
