Chapter 3
3-24
Soft-Off by PWRBTN
This feature allows users to configure the power button as a normal power-
on/-off button or a soft-off button. Settings are:
Instant-Off The power button functions as a normal power-on/-
off button.
Delay 4 Sec. Pressing the power button for more than 4 seconds
forces the system to enter Soft-Off state.
Default is Instant-Off.
State After Power Failure
This item specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
Off Leaves the computer in the power off state.
On Reboots the computer.
Auto BIOS automatically determines the best mode.
LED In Suspend
This item sets how the system uses Power LED on the case to indicate the
suspend state. Settings are:
Blink The Power LED blinks to indicate the suspend state.
Single The Power LED remains the same color.
Dual The Power LED changes its color to indicate the
suspend/sleep state.
Wake Up Events
Press <Enter> to enter the sub-menu and the following screen appears:
Wake Up Events
VGA OFF
LPT & COM LPT/COM
HDD & FDD ON
PCI Master OFF
PowerOn by PCI Card Disabled
Wake Up On LAN/Ring Disabled
RTC Alarm Resume Disabled
Date (of Month) 0
Resume Time (hh:mm:ss) 0 0 0
Primary INTR ON
IRQs Activity Monitoring Press Enter
Item Help
Menu Level !!
x
!
x
To Next Page
Loading...
