AWARD
®
BIOS Setup
3-25
VGA, LPT & COM, HDD & FDD, PCI Master, PowerOn by PCI Card, Wake
Up On LAN/Ring
These items specify whether the system will be awakened from power saving
modes when activity or input signal of the specified hardware peripheral or
component is detected.
Note: To use the function of Wake Up On LAN/Ring, you need to install a
LAN card/modem supporting power on function.
RTC Alarm Resume
This is to enable or disable the feature of booting up the system on a
scheduled time/date. Settings are Enabled and Disabled (default)
Date (of Month)
Specifies the date for RTC Alarm Resume. Settings are 0~31.
Resume Time (hh:mm:ss)
Specifies the time for RTC Alarm Resume. Format is <hour><minute>
<second>.
Primary INTR
When this is set to On, any event occuring will wake up the system which
has been powered down.
IRQs Activity Monitoring
Press <Enter> to enter the sub-menu and the following screen appears:
To Next Page
Loading...
