Chapter 3
3-8
Advanced BIOS Features
Quick Boot
Setting the item to Enabled allows the system to boot within 5 seconds
since it will skip some check items. Available options are Enabled and
Disabled. The default value is Enabled.
1st/2nd/3rd Boot Device
The items allow you to set the sequence of boot devices where AMIBIOS
attempts to load the operating system. The settings are:
IDE0 The system will boot from the first HDD.
IDE1 The system will boot from the second HDD.
IDE2 The system will boot from the third HDD.
IDE3 The system will boot from the fourth HDD.
Floppy The system will boot from floppy drive.
LS120/ZIP-FD The system will boot from LS-120 or ZIP drive that
functions as floppy drive.
MO/ZIP-HD The system will boot from MO or ZIP drive that
functions as hard disk drive.
AMIBIOS SETUP - ADVANCED BIOS FEATURES
(C)2001 American Megatrends, Inc. All Rights Reserved
ESC : Quit ↑↓←→ : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Load Previous Values
F6 : Load Fail-Safe Defaults
F7 : Load Optimized Defaults
Quick Boot :Enabled
1st Boot Device :Floppy
2nd Boot Device :IDE-0
3rd Boot Device :CDROM
Boot Other Device :Yes
S.M.A.R.T. for Hard Disks :Disabled
BootUp Num-Lock :On
Floppy Drive Swap :Disabled
Floppy Drive Seek :Enabled
Password Check :Setup
Boot To OS/2 :No
CPU Serial Number :Disabled
Internal Cache :Enabled
External Cache :Enabled
C000, 32k Shadow :Cached
To Next Page
Loading...
