Intel ICH5R Serial ATA RAID Introduction
B-5
BIOS Configuration
The Intel RAID Option ROM should be integrated with the system
BIOS on all motherboards with a supported Intel chipset. The Intel RAID
Option ROM is the Intel RAID implementation and provides BIOS and DOS
disk services. Please use <Ctrl> + <I> keys to enter the “Intel(R) RAID for
Serial ATA” status screen, which should appear early in system boot-up,
during the POST (Power-On Self Test).
MSI Reminds You...
The “Driver Model”, “Serial #” and “Size” in the following
example might be different from your system.
After the above message shows, press <Ctrl> and <I> keys
simultaneously to enter the RAID Configuration Utility.
Using the Intel RAID Option ROM
1. Creating, Deleting and Resetting RAID Volumes:
The Serial ATA RAID volume may be configured using the RAID
Configuration utility stored within the Intel RAID Option ROM. During the
Power-On Self Test (POST), the following message will appear for a few seconds:
To Next Page
Loading...
