Getting Started
On-Board Peripherals
Q. On-Board Peripherals include:
- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes
-1 serial port (COM A)
-1 parallel port supports SPP/EPP/ECP mode
- 4 USB ports (Rear * 2/ Front * 2)
-1 IrDA connector for SIR/CIR/FIR/ASKIR/HPSIR
-1 VGA port
-1 Audio/Game port
Network (Optional)
Q. ADMtek AN983B
Audio
Q_ Audio controller integrated in 686B chipset
Q_ Software audio codec Realtek ALC101T
- Onboard Front Audio Pin Header
BIOS
Q. The mainboard BIOS provides "Plug & Play" BIOS which detects the pe-
ripheral devices and expansion cards of the board automatically.
The mainboard provides a Desktop Management Interface (DMI) function
which records your mainboard specifications.
Dimension
Q. Micro-ATX Form
Factor:
24.4 cm (L) x 21.5 cm (W)
Mounting
Q. 6 mounting holes
Others
Q. Suspend to Disk S4/S3
Q. Plug and Play function
a Supports PCI 2.2
Q. Hardware Monitoring (optional)
Q. Modem (External/Internal) Ring Wake up Function
Q- LAN Wake up Function
To Next Page
Loading...
