MSI MS-6378 - Integrated Peripherals

Chapter 1
Integrated Peripherals
CMOS Setup Utility - Copyright(C) 1984-2000 Award Software
Integrated Peripherals
OnChip IDE ChannelO
Enabled
Item Help
OnChip IDE Channell
Enabled
Item Help
IDE Prefetch Mode Enabled
Primary Master PIO Auto
Menu Level
k
Primary Slave PIO Auto
Secondary Master PIO Auto
Secondary Slave PIO Auto
Primary Master UDMA
Auto
Primary Slave UDMA Auto
Secondary Master UDMA Auto
Secondary Slave UDMA Auto
Init Display First PCI Slot
Onboard Lan Device
Enabled
IDE HDD Block Mode
Enabled
Onboard FDD Controller Enabled
Onboard Serial Port 1 Auto
Onboard Serial Port 2
Disabled
x UART 2 Mode
Standard
x
IR Function Duplex
Half
TX, RX in .erting enable No, Yes
Onboard Parallel Port
378/IRQ7
Onboard Parallel Mode
Normal
ECP Mode Use DMA 3
Parallel Port EPP Type
EPP1.9
Onboard Legacy Audio
Enabled
Sound Blaster
Disabled
SB I/O Base Address
220H
SB IRQ Select IRQ 5
SB DMA Select
DMA 1
MPU-401
Disabled
MPU-401 I/O Address
330-333H
Came Port (200-207H)
Enabled
T i —> :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:Ceneral Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
OnChip ШЕ Channel 0/1
The integrated peripheral controller contains an IDE interface with support for
two IDE channels. Choose Enabled to activate each channel separately.
2-16