Chapter 1
DIMM Module Combination
Install at least one DIMM module on the slots. Memory modules can be
installed on the slots in any order. You can install either single- or double-
sided modules to meet your own needs.
Memory modules can be installed in any combination as follows:
Slot Memory Module
Total Memory
DIMM 1
(Bank 0 & 1)
S/D
3 2MB ~512MB
DIMM 2
(Bank 2 & 3)
S/D
3 2MB ~512MB
Maximum System Memory Supported
32MB-1GB
S: Single Side D: Double Side
Installing DIMM Modules
The DIMM slot has 2 Notch Keys "VOLT and DRAM". The module will
only fit in the right orientation.
1. Insert the DIMM memory module vertically into the DIMM slot. Then push
it in.
2. The plastic clip at each side of the DIMM slot will automatically close.
2-6
To Next Page
Loading...
