3-20
MS-7071 M-ATX Mainboard
PNP/PCI Configurations
This section describes configuring the PCI bus system and PnP (Plug & Play)
feature. PCI, or Peripheral Component Interconnect, is a system which allows
I/O devices to operate at speeds nearing the speed the CPU itself uses when
communicating with its special components. This section covers some very
technical items and it is strongly recommended that only experienced users
should make any changes to the default settings.
Primary Graphic’s Adapter
This setting specifies which VGA card is your primary graphics adapter. Set-
ting options are:
[Auto] The system initializes the graphic’s adapter automatically.
[PCI Mode] The system initializes the PCI Express graphic first. If a PCI
Express graphic card is not available, it will initialize the internal
graphic’s adapter.
IRQ Resource Arrange
Press <Enter> and the following sub-menu appears:
To Next Page
Loading...
Need help?
General
