MSI RX480 Neo2 MS-7151 User Manual

3-17
BIOS Setup
Resume by PS/2 Keyboard
This controls how and whether the PS/2 keyboard is able to power on the
system. If you choose [Password], you must type the password to power
on the system. Settings: [Disabled], [Password] and [Any Key].
Keyboard Password
If Resume by PS/2 Keyboard is set to [Password], then you can set a
password in the field for the PS/2 keyboard to power on the system.
Resume by PS/2 Mouse
The setting determines whether the system will be awakened from power
saving modes when the PS/2 mouse input signal is detected. Setting options:
[Disabled], [Enabled].
Resume by PCI Device (PME#)
When setting to [Enabled], this setting allows your system to be awakened
from the power saving modes through any event on PME (Power Manage-
ment Event). Setting options: [Disabled], [Enabled].
Resume by PCIE Device (PME#)
When setting to [Enabled], this setting allows your system to be awakened
from the power saving modes through any event on PME (Power Manage-
ment Event). Setting options: [Disabled], [Enabled].
Resume by RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the S3, S4, and S5 power off state. Setting
options: [Disabled], [Enabled].
Date/Time (HH:MM:SS)
If Resume By RTC Alarm is set to [Enabled], the system will automatically
resume (boot up) on a specific date/hour/minute/second specified in these
fields (using the <+> and <-> to select the date & time settings). Available
settings for each item are:
Date 01 ~ 31, Every Day
Time (HH:MM:SS) 00 ~ 23 : 00 ~ 59 : 00 ~ 59
MSI Reminds You...
If you have changed this setting, you must let the system boot up
until it enters the operating system, before this function will work.

MSI RX480 Neo2 MS-7151 Specifications

General

Model	RX480 Neo2 MS-7151
Socket	Socket 939
Memory Type	DDR
Maximum Memory Supported	4GB
PCI-E x16 Slots	1
IDE	2 x ATA 133
Form Factor	ATX
Memory Slots	4
SATA	4
PCI Slots	3