MSI RX480 Neo2 MS-7151 User Manual

3-12
MS-7151 ATX Mainboard
Integrated Peripherals
USB Controller
This setting is used to enable/disable the onboard USB host controller. Setting
options: [Disabled], [Enabled].
USB Device Legacy Support
Set to [Enabled] if you need to use any USB 1.1/2.0 device in the operating
system that does not support or have any USB 1.1/2.0 driver installed, such as
DOS. Set to [Disabled] only if you want to use any USB device other than the
USB mouse. Setting options: [Disabled], [Enabled].
Onboard LAN Controller
The item enables or disables the onboard LAN controller. Setting options:
[Enabled], [Disabled].
Onboard LAN Option ROM
The item enables or disables the initialization of the onboard LAN Boot ROMs
during bootup. Selecting [Disabled] will speed up the boot process. Setting
options: [Enabled], [Disabled].
AC97 Controller
This item is used to enable or disable the onboard AC97 (Audio Codec) controller.
Selecting [Enabled] allows the mainboard to enable the onboard AC97 controller.
Disable the function if you want to use other controller cards to connect an
audio device. Settings: [Disabled] and [Enabled].

MSI RX480 Neo2 MS-7151 Specifications

General

Model	RX480 Neo2 MS-7151
Socket	Socket 939
Memory Type	DDR
Maximum Memory Supported	4GB
PCI-E x16 Slots	1
IDE	2 x ATA 133
Form Factor	ATX
Memory Slots	4
SATA	4
PCI Slots	3